
Single hung
The top sash is fixed; the bottom sash slides up and tilts in for easy cleaning. Half screen.
- White
- Tan
- Adobe
- 2-Tone
New windows change how your home looks and how it feels inside: fewer drafts, less heat at the glass, quieter rooms. We carry two lines, both custom built in Dallas: the Genview 5000 Series in premium vinyl and the 8000 Series in thermally broken aluminum.
We carry two lines of custom-sized replacement windows, made to order in Dallas for the North Texas climate. Choose by frame material and look; every window is measured, installed and finished to the same standard.

A deep, multi-chamber vinyl frame made with a hail-resistant compound for long life in hard Southern sun.

Thick-wall aluminum strength with a polyurethane thermal break that slows heat through the frame, under a tough powder-coat finish.
Premium vinyl formulated for hail resistance and long life in harsh Southern sun, with an aluminum-reinforced meeting rail, triple-layer Low-E glass and tilt-in sashes. Custom built to the size of each opening.

The top sash is fixed; the bottom sash slides up and tilts in for easy cleaning. Half screen.

One sash glides side to side, a clean fit for wide openings and spots where a vertical window won't work.

Both sashes open and tilt in, for better airflow and cleaning without a ladder. Full screen.

Both vents slide side to side for flexible ventilation across wide openings. Full screen.

Fixed glass for maximum light and uninterrupted views, also built in specialty shapes.

A single hung with an arched top sash: traditional curb appeal with everyday function.

Cranks fully open for ventilation and an unobstructed view. Built as a single, a pair, or three lites with a fixed center.
The casement system hinged at the top, so it cranks outward and keeps ventilating in a light rain.

Thick-wall aluminum with a polyurethane thermal break in the frame and sash, so it insulates far better than ordinary aluminum while keeping the strength of metal. Finished in a powder coat tough enough for the harshest Texas summers.

The workhorse of the line, commercially rated (LC-50). The bottom sash slides up and tilts in. Half screen.

One sash glides side to side on a smooth track, a clean fit for wide openings. Half screen.

Fixed glass in a 2 3/4" (8310) or 3 1/4" (8510) frame, also built in arch top, round top, trapezoid and other shapes.

A single hung with an arched top sash for traditional curb appeal. Half screen.

Cranks fully open, with concealed hinges, a folding crank handle and a steel multipoint lock. Full interior screen.
The casement system hinged at the top, with the same multipoint lock and triple weather-stripping.
Both sashes open and tilt in, with interlocking meeting rails. Commercially rated (LC-30). Full screen.
Both vents slide side to side for flexible ventilation across wide openings. Full screen.

Both are custom built in Dallas with insulating Low-E glass and a lifetime limited warranty. The difference is the frame.
| 5000 Series | 8000 Series | |
|---|---|---|
| Frame material | Premium multi-chamber vinyl, aluminum-reinforced meeting rail | Thick-wall aluminum with a polyurethane thermal break |
| Frame depth | 3 1/4" | 2 3/4" or 3 1/4" |
| Glass | Triple-layer LoE³, 3/4" insulating | LoE³-366, 3/4" or 7/8" insulating |
| Look | Vinyl profile in light, classic colors | Aluminum profile with a powder-coat finish, including dark colors |
| Colors | White, tan, adobe; 2-tone black or bronze exterior | White, silver, tan, bronze, black |
| Styles | Single hung, double hung, slider, double slider, picture, arch top, casement, awning | Single hung, double hung, slider, double slider, picture, arch top, casement, awning |
| Warranty | Lifetime limited | Lifetime limited |
| Good fit for | Most DFW homes, especially where hail and UV are the main worries | Homes that want bronze or black frames, or the strength of aluminum |
Every window we sell carries an NFRC label. Two numbers on it matter most in North Texas.
How much of the sun's heat gets through the glass. Lower is better in a hot climate, especially on west- and south-facing walls.
How well the whole window holds back heat flowing through it. Lower means better insulation.
A microscopically thin layer on the glass that reflects heat while letting daylight through, and cuts the UV that fades floors and furniture.
A dense, clear gas between the panes slows heat transfer, and insulated spacers reduce condensation at the edges.
There are two ways to put a new window in an old opening. Which one fits your home depends on the condition of your existing frames, your trim, your budget and your timeline. We check every opening and recommend one before you buy.
Also called a retrofit or insert installation. We remove the old sashes and jamb liners but leave the existing frame in the wall. A complete new window, built to fit inside that frame, is set into the opening and fastened to the old side jambs.
Your existing frames are solid and square, you want to keep the interior trim, or speed and budget come first.
We remove the entire window, frame and all, down to the rough opening in the wall. That lets us inspect, repair and insulate before a new window that fills the full opening goes in.
Frames are rotted, warped or leaking, you suspect damage in the wall, or you want the most glass, light and view.
| AT A GLANCE | POCKET (RETROFIT) | FULL-FRAME |
|---|---|---|
| Existing frame | Stays in the wall | Removed to the rough opening |
| Inspect inside the wall | No | Yes, with repairs as needed |
| Glass area | A little smaller than before | Same as the original |
| Interior trim | Kept as is | Can be replaced or updated |
| Cost and time | Lower, faster | Higher, longer |
You don't have to decide on your own. When we measure, we check each frame for rot, water damage and movement. If pocket installs will serve you well, we'll say so. If we recommend full-frame for some openings, we'll show you why. Many homes end up with a mix.
You'll know the price and the product before anything is ordered, and we schedule your install as your custom windows near completion.

We measure every opening, check the frames and surrounding wall, and recommend pocket or full-frame installation for each.
Your windows are built to size. We place the order after your three-day right to cancel has passed, then schedule your install date as the build nears completion.
Old units out, new units in, insulated, sealed and trimmed. Pocket installs go quickest; full-frame openings take longer.
We open and lock every window with you, clean up, and register your warranty.
Don't see your question? Call 469.340.4780 or book a free home assessment.
We'll measure, show you the 5000 and 8000 Series, and price it in writing. No pressure.